GIGABYTE GA-7vkml - Manual (Page 27)

English
Hardware Installation Process - 23 -
14 ) F_USB1 (Front USB Connector)
(F_USB1 connector in yellow is for
USB 1.1)
Ø Be careful with the polarity of the front
USB connector. Check the pin assignment
while you connect the front USB cable.
Please contact your nearest dealer for
optional front U SB cable.
15 ) COM B ( White ) Ø Be careful with the polarity of the COMB
connector. Check the pin assignment
while you connect the COM B cable.
Please contact your nearest dealer for
optional COMB cable.
9 10
1 2
NDCDB-
NRTSB-
NSOUTB
GND
NRIB-
NSINB
NDTRB-
NDSRB-
NCTSB-
NC
16 ) CI (Case Open)
Ø This 2 pin connector allows y our system to
enable or disable the “case open” item in
BIOS if the system case begin remove.
GND
USB Dy+
USB Dx+
GND
USB
Over
Current
USB Dx-
Power
1
Power
USB Dy-
18 ) SPDIF *
17 ) SPDIF_IN *
GND
SPDIF IN
1
VCC
Ø The SPDIF output is capable of providing
digital audio to external speakers or com
pressed AC3 data to an external Dolby
Digital Decoder. Use this feature only when
your stereo system has digital input
function.
Ø Use this feature only when your device has
digital output function.
1
Signal
GND
SPDIF Out
VCC GND
1
" * " Supported 7VKML / 7VKML-P / 7VKML-DL (PCB VER:3.4)