GIGABYTE GA-7vkml - Manual (Page 24)

- 20 - GA-7VKML Series Motherboard
English
4) FDD (Floppy Connector)
1
5) IDE1/IDE2 [IDE1 (Primary), IDE2(Secondary) Connector]
IDE2
1
IDE1
1
Ø Please connect the floppy driver ribbon cables
to FDD. It supports 360K,1.2M,720K,1.44M
and 2.88M bytes floppy disk types.
The rad stripe of the ribbn cable must be the
same side with the P in1.
Ø Important Notice:
Please connect first harddisk to IDE1 and
connect CDROM to IDE2.
The rad stripe of the ribbn cable must be the
same side with the P in1.
MPD+ MPD- MPD-
1
6 ) PWR_LED Ø PWR_LED is connect with the sy stem power
indicator to indicate whether the system is
on/off. It will blink when the system enters
suspend mode. If you use dual color LED,
power LED will turn to another color.