Gefen 1080P - Manual (Page 21)

page | 11
Front Panel LCD Screen
The front-panel of the 16x16 3G-SDI Matrix w/ Push Button Controls contains a
16-character 2-line LCD display which is used to provide feedback when performing routing
functions. In addition, this display is used to show the current routing status of the matrix.
Besides displaying routing information and other feedback during various operations,
the matrix provides setting information, from the Home screen. Consecutively press the
Cancel button to display other matrix settings. The matrix will automatically return to the
Home screen after a few moments if the Cancel button is not pressed within a certain
amount of time.
LCD Screen Description
FW 2.1
BOLO 1.6
Displays the current firmware and boot loader
version.
IP ADDRESS
192.168.0.70
Displays the current IP address of the matrix.
See IP Configuration for information on
changing the IP address of the matrix.
MAC ADDRESS
0.1C.91.1.30.58
Displays the MAC address of the matrix.
The MAC address cannot be changed.
IR address
SW1=0, sw2=0
Displays the DIP switch settings required
in order for the IR remote control unit to
communicate with the matrix.
Front Panel Controls
Operating the 16x16 3G-SDI Matrix w/ Push Button Controls
GEFEN
3GSDI 16x16
GEFEN
3GSDI 16x16