Getting the current masking status, Page | 21 – Gefen 1080P User Manual
Page 31
page | 21
GEFEN
3GSDI 16x16
Getting the Current Masking Status
If the masking state is unknown, it can be queried using the Mask button. Alternatively, the
masking state can be retrieved through the
or by using the
m
command.
1. Press the
Mask button. The Mask button will glow bright blue and the LCD will
indicate that the matrix is in mask mode.
If any outputs are currently masked, they will be indicated on the front panel.
For example, since we recently masked Output 6 and Output 7, these buttons will
glow bright blue, as shown below.
2. After a few moments, the selected buttons will turn off and the LCD will return to the
Home screen.
Masking
Operating the 16x16 3G-SDI Matrix w/ Push Button Controls
MASK MODE
GEFEN
3GSDI 16x16
MASK MODE