Unmasking outputs, Page | 22 – Gefen 1080P User Manual
Page 32
page | 22
Masking
Operating the 16x16 3G-SDI Matrix w/ Push Button Controls
Unmasking Outputs
Once an output (or multiple outputs) has been masked, it can be unmasked.
Unmasking an output will allow the video signal to be displayed after a masking operation.
We’ll continue with our previous example and unmask Output 6 and Output 7.
1. Press the
Mask button. The Mask button will glow bright blue and the LCD will
indicate that the matrix is in mask mode.
Once the mask button is pressed, any outputs that have been masked will be
indicated on the front panel.
2. To unmask an output, press the desired output(s). In our case, we will select both
Output 6 and Output 7. Each button will turn off as it is pressed.
3. Press the
Set button. The Set button will flash momentarily.
MASK MODE
MASK MODE
MASK MODE
MASK MODE
Set button