Global Machinery Company MOC6L - Manual (Page 8)

8
The following hazards may arise in connection with the
tool’s construction and design:
• Damage to the lungs if an effective breathing mask is
not worn.
• Damage to hearing if effective earmuffs are not worn.
• Damage to the eyes if effective safety goggles or shield
are not worn.
WARNING. In the event that an air line is cut or broken,
the air line needs to be immediately disconnected from
the compressor at the quick release fitting. This will
automatically stop the air from free flowing. A broken air
line which is not supported is extremely dangerous and can
whip around very quickly, both with the capability of striking
people, and blowing foreign particles into the air.
Do not attempt to catch the air line but immediately keep
bystanders well clear. Disconnecting the remaining hose
from the quick release fitting on the unit will automatically
shut off the air supply. Turn off the compressor at the On /
Off rocker switch.
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Components
The MOC6L air compressor is supplied with the
following components:
a. Air compressor
b. Blow gun
c. Blow gun adaptor
d. Tapered inflation fitting
e. Tire chuck
f. Inflation needle
g. Nitto fitted air hose coil
h. 1/4” male nitto plugs/adaptors (X2)
i. Roll of teflon tape