Gefen EXTRA LONG RANGE EXTENDER GTB-HDKVM-ELR - Manual (Page 10)

7
RECEIVER UNIT DESCRIPTIONS
1 Ext IR
Connect an IR Extender (Gefen part no. EXT-RMT-EXTIR) cable from this port
to the Hi-Def source to extend the IR control.
2 ETH
Connects an Ethernet cable from this port to a network device.
3 LINK
Transmits the HDMI, Ethernet, and IR signals from the Sender Unit to the
Receiver Unit using CAT-5e / CAT-6 cable.
4 USB LINK
Transmits USB signals from the Sender Unit to the Receiver Unit using
CAT-5e / CAT-6 cable.
5 USB Indicator
This LED glows green when a USB source is connected to the Receiver Unit.
6 USB Output Connectors
Connect the USB remote devices, such as a keyboard and mouse, to these
ports.
7 IR
This IR window receives signals from the Hi-Def source IR remote control. The
IR signals are sent back to the source device, when using an IR Blaster on the
Sender Unit.
8 HDMI Out
Connect an HDTV to this HDMI connector.
9 PWR
This LED will glow red once the included 5V DC locking power supply has
been properly connected to the unit and the locking power supply has been
connected to an available electrical outlet.
10 5V DC
Connect the included 5 V DC locking power supply to this connector.