Gefen EXTRA LONG RANGE EXTENDER GTB-HDKVM-ELR - Manual (Page 4)

1
Congratulations on your purchase of the GefenToolBox HDKVM Extra Long
Range Extender. Your complete satisfaction is very important to us.
About Gefen
We specialize in total integration for your home theater, while also focusing on
going above and beyond customer expectations to ensure you get the most from
your hardware. We invite you to explore our distinct product line. Please visit
http://www.gefen.com for the latest offerings in High-Defi nition signal solutions or
call us between the hours of 8:00 am and 5:00 pm Monday-Friday, Pacifi c
Standard Time for assistance with your A/V needs. We’ll be happy to assist you.
Why GefenToolBox?
The GefenToolBox line offers portable and easy-to-install solutions for common
A/V system integration setups using DVI and HDMI connectivity. GefenToolBox
products are wall-mountable and small in size. GefenToolBox products are easily
transported in the fi eld and are ready for immediate and simple installations in
working environments. These products come fi nished in a glossy color to blend in
with either a white wall or black cabinet.
The GefenToolBox HDKVM Extra Long Range Extender
The HDKVM Extra Long Range Extender extends any Hi-Def souce plus
Ethernet, and USB to an HDTV display or other digital signage
application over a distance up to 330 feet (100 meters) using two CAT-5 cables.
USB 2.0 data rates up to 480 Mbps are supported in addition to backward-com-
patibility with USB 1.1. The Receiver Unit allows the connections of up to two (2)
USB devices, providing access to printers, scanners, cameras, external storage
media, digital signage, and automated control systems.
This product uses Gefen ELR (Extra Long Range) technology, supporting
HDBaseT Specifi cations, allowing multiple signals to travel along the same
CAT-5 cable. A second CAT-5 cable is used for USB extension.
How It Works
Place the Sender Unit next to the Hi-Def source. Use the included HDMI cable
to connect the Hi-Def source to the Sender Unit. Use the supplied USB cable to
connect the USB host (source) device to the USB port on the Sender Unit. Con-
nect the Receiver Unit to the HDTV display monitor or digital signage display with
an HDMI cable. Connect the USB devices to the Receiver Unit. Use two CAT-5
cables, up to 330 feet (100 meters), to connect the Sender Unit to the
Receiver Unit. Connect the included locking power supplies to the Sender Unit
and Receiver Unit, and then connect both power cords to available electrical
outlets.
INTRODUCTION