Gefen EXTRA LONG RANGE EXTENDER GTB-HDKVM-ELR - Manual (Page 13)

10
DIP SWITCH CONFIGURATION
Receiver Unit
The Gefen HDKVM Extra Long Range Extender contains four (4) DIP switches
on the bottom of the Receiver Unit (the Sender Unit does not contain DIP
switches). Each of these DIP switches performs a different function.
DIP Switch 1 - EDID Mode (Default = ON)
• ON - Pass-Through Mode
DDC and HPD are passed through. Both the connection status and the full
video capabilities of the monitor are used by the source device.
• OFF - Local EDID Mode
Local EDID is used instead of the EDID from the display device. EDID
features newer than HDMI 1.3 are removed when the display is read. This
provides a general EDID which is compatible with more displays.
Four DIP switches located on
the bottom of the Receiver Unit.