Grundig G5 - Manual (Page 10)

AUTO-SEARCH TUNING continued
auto searching shortwave stations, place the bandwidth switch into
the WIDE position.
STOP: Auto-searching stops on the next encountered station.
D-5: Auto-searching stops for 5 seconds on each next encountered
station, then moves on.
ATS: (Auto Tuning Storage): Auto-searching automatically stores
the strongest FM local stations into memories starting with page 99
and counting downward until all are stored, e.g. 98, 97, 96, etc.
Tune to the FM band and perform auto-search. After the ATS scan,
select your memory with the buttons and the station with the
F1-7 buttons. If too many memories are filled with static, try the
scan again with the DX/LOCAL switch set in the LOCAL position.
To select an auto-search mode:
1. Hold down the F6 button for about 2 seconds, then release.
Note that the last chosen mode flashes in the screen.
2. While the mode flashes, perform quick, short presses of the F6
button to select alternate modes.
3. Press PAGE/TIME button.
(Use this same procedure to change your time zone when travel-
ing).
1. With the G5 turned on, perform a quick, short press of TIME
ZONE button. ‘Tzone’ appears in the display.
2. Use the tuning knob to select your home time zone (see time
zone abbreviation list below).
3. Long, 3 second press of TIME ZONE button. ‘Tzone disappears
from the display.
SETTING YOUR TIME ZONE
8
G5 OWNER’S MANUAL