Grundig G5 - Manual (Page 6)

SETTING UP AM AND FM OUTSIDE OF NORTH
AMERICA
To use the G5 in North America (U.S. or Canada), no changes to the
initial factory settings are needed.
In North America, AM stations are spaced by 10 KHz. In Europe and
other areas, they are spaced by 9 KHz. In North America, the FM
band begins at 87.5 MHz. In other parts of the world, it may begin
at 87 MHz or 76 MHz. Follow these steps to set this for your area:
1. With the G5 off, press the F5 button for about 3 second - ‘9’ or
‘10’ flashes in the display.
2. Use sequential F5 presses to select 9 or 10, then press the
‘PAGE/TIME’ button – the FM frequency flashes in the display.
3. Sequentially press the F5 button until the beginning FM fre-
quency of your area appears.
4. Press PAGE/TIME to finalize the procedure.
The sleep timer enables the G5 to play for a specified number of
minutes (00-99), then shut off. It can be activated and programmed
with the G5 turned on or off. In sleep mode, the sleep symbol ap-
pears in the display.
1. With the G5 on or off, use the numeric keypad to enter the
desired time (00-99 minutes).
2. Within 3 seconds press the SLEEP button. The G5 plays for the
specified time.
To change the sleep time:
After the sleep time has been selected, press SLEEP for about two
seconds, then use the tuning knob to change it and press PAGE/
TIME.
USING THE SLEEP TIMER
4
G5 OWNER’S MANUAL