Grundig G5 - Manual (Page 14)

CHECKING MEMORY CAPACITY
Turn on the G5. While holding down the CHECK button, turn the
tuning knob to select memory pages. Empty memories do not have
the box around them.
1. Turn on the G5 and enter MEMO mode by pressing the PAGE/
TIME button, causing MEMO to appear in the display.
2. Select the desired memory page with the buttons.
3. Select the desired memory with buttons F1-7.
1. Turn on the G5 and enter MEMO mode by pressing the PAGE/
TIME button, causing MEMO to appear in the display.
2. Select the desired memory page with the buttons.
3. While holding down the ERASE button, press the F1-7 button
that you wish to erase. Note that the box surrounding the memo-
ry location disappears.
4. Release the ERASE button.
With the G5 on, hold down the EDIT and SSB buttons simultaneous-
ly, then press RESET. This deletes the contents of all memory pages.
ACCESSING STORED MEMORIES
ERASING A SELECTED MEMORY
DELETING ALL MEMORY CONTENTS
12
G5 OWNER’S MANUAL