Graco PRECISIONSWIRL 310554V - Manual (Page 12)

Installing the Control Assembly
12 310554V
Mounting the Control Assembly (continued)
F IG . 4
7.05
(171.1 mm)
16.00
(406.4 mm)
14.50
(368.3 mm)
14.50
(368.3 mm)
16.00
(152.4 mm)
NOTE: Hidden lines depict the
hole pattern for mounting the control
assembly.
NOTE: Conrol assembly must be
readily accessible and located 24-67
in. (0.6-1.7 m) above the floor.
7/8 in. diameter
hole for power
supply entry. Robot control
cable connector Motor cable
connector
4x 0.13 in. (8 mm) diameter
mounting holes