Genie Z-34 - Manual (Page 21)

Operator's Manual Fourth Edition • Third Printing
Part No. 1000048 Z-34/22 IC 19
FUNCTION TESTS
Test Drive and Braking
29 Press down the foot switch.
30 Slowly move the drive control handle in the
direction indicated by the blue arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The travel alarm should sound. The
machine should move in the direction that the
blue arrow points on the drive chassis, then
come to an abrupt stop.
31 Slowly move the drive control handle in the
direction indicated by the yellow arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The travel alarm should sound. The
machine should move in the direction that the
yellow arrow points on the drive chassis, then
come to an abrupt stop.
Note: The brakes must be able to hold the machine
on any slope it is able to climb.
Test the Drive Enable System
32 Press down the foot switch.
33 Retract the primary boom to the stowed position.
34 Rotate the turntable until the boom moves past
one of the non-steer wheels.
Result: The drive enable
indicator light should come
on and remain on while the
boom is anywhere in the
range shown.
35 Move the drive control handle off center.
Result: The drive function should not operate.
36 Move and hold the drive enable toggle switch up
or down and slowly move the drive control
handle off center.
Result: The drive function should operate.
Note: When the drive enable system is in use, the
machine may drive in the opposite direction that the
drive and steer control handle is moved.
Use the color-coded
direction arrows on the
platform controls and the
drive chassis to identify
the direction of travel.
Blue
Yellow