Genie Z-34 - Manual (Page 29)

Operator's Manual Fourth Edition • Third Printing
Part No. 1000048 Z-34/22 IC 27
Platform Overload Indicator Light
(if equipped)
Light flashing indicates the
platform is overloaded and no
functions will operate.
Remove weight from the
platform until the light goes off.
Machine Not Level Indicator Light
(if equipped)
Light on indicates the machine is not
level. The tilt alarm will be sounding
when this light is on. Move the
machine to a firm level surface.
OPERATING INSTRUCTIONS
Fall Protection
Personal fall protection equipment (PFPE) is
required when operating this machine.
All PFPE must comply with applicable
governmental regulations, and must be inspected
and used in accordance with the PFPE
manufacturer’s instructions.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is
between the non-steer wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.