GE GN75ENSRSA - Manual (Page 3)

3
Installation Instructions
TOOLS YOU WILL NEED
• Pipe Wrenches (2) • Gloves
• Adjustable Pliers • Safety Glasses
• Screwdrivers (2)
• Wire Cutters
MATERIALS YOU WILL NEED TO SUPPLY
• Soap Solution • 3/4″ Pipe Fittings
• Pipe Compound Required:
• 5/8″ ID PVC Flexible – Unions
Tubing – Ball Valves
• 2 Conductor 22 AWG – Drain Valves
Wire for Remote
– Pressure Relief Valve
Control
• Single Gang Electrical Box
• Wire Nuts
• Outdoor Rated Switch and Enclosure
• Concrete Wall Anchors (Optional)
Your installation components may vary.
PARTS PROVIDED
Locate the parts packed with the Water Heater.
Gas Valve
3/4″ FNPT Ball Valve
4 #10 x 1 1 ⁄
4 ″
Wood Screws
OTHER TOOLS THAT MIGHT BE REQUIRED
• Hammer Drill with Concrete Bits
• Saw
• Threading Machine with Heads and Oiler
• Core Drill with Diamond Head
• Torch Set
• Copper Tubing Cutter
• Steel Pipe Cutter
OTHER MATERIALS THAT MIGHT BE NEEDED
• Heat Tape
• Pipe Insulation
• Electrical Wire and Conduit per Local Code
• Air Inlet Screen
• Optional Pipe Cover AGTPCM
• Optional Additional Remote Controller AGTRC1
Remote
Control