Gateway E-2500D - Manual (Page 33)

28 www.gateway.com
Chapter 3: Getting Started
Connecting to a cable or DSL modem or
to an Ethernet network
Your computer has a network jack that you can use to connect to a cable or DSL modem
or to an Ethernet network.
To connect to an Ethernet network:
1
Insert one end of the network cable into the network jack on the back of your
computer.
2
Insert the other end of the network cable into a cable modem, DSL modem, or Ethernet
jack.
Important
Your computer is equipped with a built-in Ethernet port.
For information about setting up a wired or wireless Ethernet network,
see
“Networking Your Computer” on page 77 .
8510807.book Page 28 Thursday, June 30, 2005 7:27 AM