Gateway E-2500D - Manual (Page 89)

84 www.gateway.com
Chapter 7: Networking Your Computer
6
Click the General tab.
7
Click Obtain an IP address automatically .
8
Click OK to close the Internet Protocol (TCP/IP) Properties dialog box.
9
Click OK to close the Local Area Connection Properties dialog box.
10
Click X to close the Network Connections window.
11
Repeat this procedure for every computer on your network.
Setting up an Ethernet network
We recommend using category 5, unshielded, twisted-pair cable (approximately 1/4” in
diameter with a thin outer-jacket, containing eight color-coded wires), and equipment
compatible with this type of cable. This type of cable is equipped with RJ-45 connectors
(like a large telephone jack connector, but with eight pins) on each end.
8510807.book Page 84 Thursday, June 30, 2005 7:27 AM