GE D780 - Manual (Page 30)

3-7
Speed Dialing
3
Creating Groups
• The Function key will light up by pressing Function to be able to operate Clear.
NOTE
Group Dialing
1 Press Additional Functions.
2 Use 4 (–) or e (+) to select 4.ADD.
REGISTRATION
.
3 Press Set.
4 Use 4 (–) or e (+) to select 3.GROUP
DIAL
.
5 Press Set.
Ex:
6 Select a one-touch speed dialing key or
coded speed dialing code under which you
want to register the group.
• If you wish to register a group under the
already registered one-touch speed dialing
key or coded speed dialing code, or you
want to re-enter a group, you must delete
the previous information first. (
→ pp. 3-3,
3-5, 3-6)
• Do not register a group under a one-touch
speed dialing key or coded speed dialing
code, in which SUBADDRESS TX or
POLLING RX
has been set. If you do so,
you cannot send faxes to the other party’s
which have a subaddress registered.
❚ To register a group under a one-touch
speed dialing key:
Use 4 (–) or e (+) to select the key under
which you want to register the group (01 to
12).
Ex:
• If a one-touch speed dialing key has already been
registered, 1-TOUCH SPD DIAL or GROUP DIAL
appears.
• If the fax functions have been programmed into
the keys marked 01 to 12 using PROG 1-TOUCH
KEY in the Additional Functions, PROG 1-TOUCH
KEY
will appear.
❚ To register a group under a coded
speed dialing code:
Press Coded Dial, then use the numeric
keys to enter the code under which you
want to register the group (00 to 99).
Ex:
• If a coded speed dialing code has already been
registered, CODED SPD DIAL or GROUP DIAL
appears.
7 Press Set twice.
TEL=
GROUP DIAL
1.TEL NUMBER ENTRY
GROUP DIAL
A 21=
GROUP DIAL
03=
NOTE
GROUP DIAL
01=1-TOUCH SPD DIAL
ADD. REGISTRATION
3.GROUP DIAL
ADD. REGISTRATION
1.1-TOUCH SPD DIAL
ADDITIONAL FUNCTIONS
4.ADD. REGISTRATION
03 FAX_Chp3.qxd 03.7.10 3:58 PM Page 3-7