GE D780 - Manual (Page 68)

7-3
The machine is factory-set to print a TX (transmission) REPORT only when an error occurs during sending. To
change this setting,
→ p. 9-5.
If you set the machine to print a report, a TX REPORT or an ERROR TX REPORT, similar to the ones below,
will be printed depending on the setting you select.
TRANSMISSION OK
TX/RX NO 0003
DESTINATION TEL # 1 432 2060
CONNECTION ID Canon OPTICS
ST. TIME 12/27 14:59
USAGE T 00’00
PGS. SENT 0
RESULT NG #018
BUSY/NO SIGNAL
12/03/2003 17:47 FAX 123 4567 CANON 001
***********************
***********************
***
*** TX REPORT
TX FUNCTION WAS NOT COMPLETED
TX/RX NO 0004
DESTINATION TEL # 20 545 8545
DESTINATION ID Canon EUROPE
ST. TIME 12/03 17:21
TIME USE 00 18
PAGES SENT 1
RESULT NG #0018 BUSY/NO SIGNAL
THE SLEREXE COMPANY LIMITED
SAPORS LANE•BOOLE•DORSET•BH25 8ER
TELEPHONE BOOLE (945 13) 51617 – FAX 1234567
Our Ref. 350/PJC/EAC December 3, 2001
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.
12/03/2003 17:21 FAX 123 4567 CANON 001
*******************************
*******************************
***
*** ERROR TX REPORT
IF YOU ENABLE THE REPORT WITH TX IMAGE
SETTING (
→ p. 9-5), THE FIRST PAGE OF THE
DOCUMENT WILL PRINT ON THE REPORT TO
REMIND YOU OF THE CONTENTS OF THE
DOCUMENT .
OK: TRANSMISSION SUCCESSFUL
NG: SOME OR NO PAGES SENT
NUMBER OF PAGES SENT
TRANSMISSION DURATION
TRANSMISSION TIME
TX (Transmission) REPORT
7
Repor
ts and Lists
07 FAX_Chp7.qxd 03.7.10 3:55 PM Page 7-3