GE D780 - Manual (Page 79)

9-4
FAX SETTINGS
USER SETTINGS The basic operation settings in the Fax mode can be
specified.
1.TEL LINE SETTINGS Specify the telephone line settings.
1.USER TEL NO. Your telephone and fax number can be registered.
(
→ p. 2-4)
2.TEL LINE TYPE Selects the telephone line type. (
→ p. 2-7)
TOUCH TONE The telephone line is set for touch tone dialing.
ROTARY PULSE The telephone line is set for rotary pulse dialing.
3.TX START SPEED Sets the transmission speed for all documents you send.
33600bps
/14400bps/9600bps/7200bps/4800bps/240
0bps
4.RX START SPEED Sets the transmission speed for all documents you receive.
33600bps
/14400bps/9600bps/7200bps/4800bps/240
0bps
2.UNIT NAME You can register your name (or your company name).
(
→ p. 2-5)
3.TX TERMINAL ID Prints your ID (transmitting terminal ID) on each page
you transmit. (
→ p. 2-3)
1.TTI POSITION OUTSIDE IMAGE : Terminal ID is printed outside the
image border.
INSIDE IMAGE
: Terminal ID is printed inside the image
border.
2.TEL NUMBER MARK Selects the prefix for the identification header number.
FAX
, TEL
4.DENSITY CONTROL Sets the density of the documents.
LIGHT Sets for dark documents.
STANDARD Sets for the documents of normal density.
DARK Sets for light documents.
5.PROG 1-TOUCH KEY Programs a fax function into the One-Touch key. The
programmed fax function will be executed by directly
pressing the corresponding One-Touch key. You do not
need to press Function before pressing the One-Touch
key.
01 - 12 Select the One-Touch key (01 to 12) in which you want
to program the fax function.
USE Uses PROGRAM 1-TOUCH KEY.
The following functions can be programmed:
1.REPORT
;
2.DELAYED TX ;
3.FAX MONITOR ;
4.MEMORY REFERENCE ;
5.BOOK SENDING .
DO NOT USE Disables PROGRAM 1-TOUCH KEY.
Name Descriptions
(The factory default setting is in bold face.)
09 FAX_Chp9.qxd 03.7.10 4:00 PM Page 9-4