GE FPC 1000 - Manual (Page 10)

Chapter 2
2.1.2. Installing Flarion Mobility Manager Software
When it is clear that hardware and software requirements are met, installation may
proceed. Flarion Mobility Manager software must be installed, prior to insertion of the
PC-1000 card.
To install Flarion Mobility Manager:
1. Power on the PC and/or close any Windows programs that are running.
2. Insert the installation CD into the CD-ROM driver.
The CD Launcher Menu appears (see Figure 2):
Figure 2: CD Launcher Menu
Note:
If the CD Launcher menu does not automatically appear:
1. Click Start ⇒ Run ⇒ Open.
3. Click OK
The CD Launcher menu appears.
2. Type the letter of the CD Drive followed by install.exe (e.g.: D:\install.exe,
where D is the CD-ROM drive). Alternately, click Browse to locate and select
the install.exe file on the CD-ROM drive.
3. On the CD Launcher menu, click “Install Software”.
Flarion FPC 1000 Wireless Network Card User Guide  2004 Flarion
Page 10 Flarion Proprietary and Confidential