GE FPC 1000 - Manual (Page 13)

Using FPC 1000 with a Notebook PC
2.1.3.2 Attaching the Extended Range Antenna
The extended range antenna cable greatly improves signal strength and quality. It
increases the operating range of the PC, and enhances connectivity and throughput.
To install the extended range antenna, follow the instructions in Figure 5:
1. Place the foam tape bracket
retainer on the back of the
laptop screen. Make sure that
the open edge is facing
upwards.
2. Insert the connector end
of the cable into the
antenna bracket. The
connector should snap into
place.
3. Slide the antenna
bracket into the foam tape
bracket retainer.
4. Mount the antenna into
the antenna bracket. Make
sure the antenna is
pointing up.
5. Connect the other end
of the cable into the
wireless network card,
which should be inserted
into the PCMCIA slot.
Figure 5: Installing the Extended Range Antenna Kit
 2004 Flarion Version 1.0
Flarion Proprietary and Confidential Page 13