GE 21029 - Manual (Page 28)

28
8. Press and hold the PAGE button on the base unit until you hear a long
tone at the handset. HANDSET X REGISTERED shows in the handset
display, where X is the handset number. You will hear a confirmation
tone.
NOTE: After you have registered one handset, wait 10 seconds before
registering another handset to ensure successful registration.
De-Registration
Deregistration cancels registration. During the de-registration process, keep
the handset near the base.
1. Make sure your phone is OFF (not in talk mode).
2. Press the mute/prog button to go to the main menu.
3. Press cid/vol ( or ) button to scroll to HANDSET SETUP.
4. Press mute/prog button to confirm.
5. If necessary, press the cid/vol ( or ) button to scroll to the
DEREGISTRATION menu. Then, press mute/prog button to enter the
menu. DEREGISTRATION? 1YES 2NO shows in the display.
The default is 2NO.
6. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the cid/vol
( or ) button to scroll to 1YES or 2NO.
WARNING: It is not recommended that a handset be de-registered
unless absolutely necessary because once a handset is de-registered, that
handset’s telephone features cannot be used until the handset is re-
registered.
7. Select NO, if you do not want to deregister.
8. If you select 1YES, press the mute/prog button and MOVE NEAR TO
BASE displays for 2 seconds, then CONFIRM? 1YES 2NO appears in the
display.
9. Press the touch-tone pad to select 1YES or 2NO, or use the cid/vol ( or

) button to scroll to 1YES or 2NO.
10. If you select YES, press the mute/prog button to confirm.
DE-REGISTER ..... shows in the display followed by a confirmation tone.
Then HANDSET X DEREGISTERED shows in the display to confirm the
handset is deregistered.