GE 21029 - Manual (Page 36)

36
Two-Way Calling
1. During an external call, press the page/int button, and use the touch-tone
pad to enter the handset number (1, 2, or 3) you want to call.
NOTE: The receiving handset presses the page/int button to answer the
intercom call. Both intercom users may speak privately. The external caller
will not hear the intercom conversation.
2. When finished, press the *exit button or page/int button to end the
intercom call, return to the talk mode, and resume your original
telephone conversation.
Three-Way Calling
1. During an external call, press the page/int key. LINE ON HOLD
EXTENSION? shows in the display.
2. Use the touch-tone pad to select Handset 1, Handset 2, or Handset 3. You
will hear a paging tone and PAGING shows in the originating handset’s
display.
NOTE: “PAGING FROM...” shows in the display on the receiving handset,
and the receiving handset presses the page/int or TALK/END/call back
button to answer the intercom.
3. When the receiving handset connects, press the FORMAT/CONF button
on the originating handset to conference with the receiving handset and
the external caller. CONFERENCE shows in the display on the originating
and receiving handsets.
NOTE: A handset can enter conference directly by pressing TALK/END/
call back while another handset is talking on an external call.
Transferring External Calls to Other Handsets
During an external call, you may transfer the external call to another handset.
1. Press the page/int button on the originating handset to put an external
call on hold, and then page the receiving handset.
2. Use the touch-tone pad on the handset to select the receiving handset.
You will hear a paging tone. PAGING shows on the originating handset’s
display, and PAGING FROM . . . shows on the receiving handset’s display.