Graco 7427 - Manual (Page 76)

4. Carefully remove the seat pad. DO NOT USE SAFETY SEAT without
the seat pad.
5. Machine wash on delicate cycle and drip-dry. DO NOT USE BLEACH.
6. Fit pad into position, then reverse the process above to properly reinstall
the harness system. You must:
a. Pass the shoulder straps through the appropriate slots and under the
owner’s manual pocket,
b. Secure the shoulder straps to the metal junction plate, and
c. Snap waist strap anchor buckles into rear indentations (buckles should
first be placed under the retainers opposite the flexible tab, then pulled or
pushed past the tab).
Check that harness system is not twisted, and pull on harness system to be
sure harness is securely reinstalled.
59