GE 2-9926 - Manual (Page 18)

1 8
H
EADSET AND
B
ELT
C
LIP
O
PERATION
HEADSET
Headset
jack
Headset plug (2.5mm)
Slot for
belt clip Slot for
belt clip
C
ONNECTING A HEADSET TO
THE HANDSET
For hands free conversation, connect the
headset (optional for 2-9925) to the
HEADSET jack as shown. The handset
receiver and microphone are disabled
when the headset is connected.
Adjust the headset to rest comfortably on
top of your head and over your ear. Move
the microphone to approximately 2 to 3
inches from your mouth.
• Press the TALK button or LINE 1 or 2 to
answer or place a call before using the
headset.
C
ONNECTING THE
B
ELT
C
LIP
There are two slots, one on each side of
the handset.
• Attach the belt clip (optional for 2-
9925) by inserting the sides of the belt
clip into the slots. Snap the ends of the
belt clip into place.