Hanging, Attery – GE 2-9926 User Manual

Page 19

Advertising
background image

1 9

C

HANGING

THE

B

ATTERY

NOTE:

The RBRC seal on the battery used in your Thomson

Consumer Electronics product indicates that we are participating in
a program to collect and recycle Nickel Cadmium batteries
throughout the United States of America. Please call 1-800-8-
BATTERY for information or contact your local recycling center.

Ni-Cd

RBRC

RBRC

Make sure RING/POWER switch is OFF
before you replace battery.

1. Remove the battery compartment door.

2. Disconnect the cord attached to the

battery pack and remove the battery
pack from the handset.

3. Insert the new battery pack and connect

the cord into the jack inside the handset.

4. Put the battery compartment door back

on.

5. If you don’t charge the handset

battery properly (for 12 hours)
when you first set up the phone
and/or when you install a new
battery pack, the battery’s long-
term performance will be compro-
mised.

B

ATTERY

S

AFETY

P

RECAUTIONS

• Don’t disassemble, mutilate, puncture, wet, or dispose of battery in fire.

Like other batteries of this type, if it is burned or punctured, it could
release toxic materials which can cause injury.

• Keep batteries out of the reach of children.

Advertising