Troubleshooting tips, Before you call for service – GE JVB37 User Manual
Page 18
Operating Instructions
Safety Instructions
Installation Instructions
Tr
oubleshooting T
ips
Consumer Support
18
Troubleshooting Tips
Save time and money! Review the chart below first
and you may not need to call for service.
Problem
Possible Causes
What To Do
Fan does not work
The vent is not fully extended.
• Press the Raise/Lower switch.
The blower control switch
• Slide it to the right.
may be in the OFF position.
Vent does not rise
Vent not plugged into an outlet.
• Plug vent into a 120V power outlet.
Raise/Lower switch did not
• Hold switch down for a couple of seconds to
engage lift motor.
activate motor.
Circuit breaker may have
• Check circuit breaker. Reset if necessary.
tripped.
Remote switch not plugged in.
• Check all connections between the remote switch
and vent body.
Before you call for service…