GE 28213 Series - Manual (Page 21)

1
NOTE: You must have the Ringer Volume set to ON for ring tone to
signal an incoming call.
Ringer Volume
From the Sound Setup Menu:
1. Press the
caller ID-volume (5 or 6) button to scroll to the RINGER VOLUME
sub-menu.
. Press mute/menu OK button to enter the menu. The screen displays 4 RING
VOLUME 5.
. Use the caller ID-volume (5 or6) button to scroll to your selection. LEVEL 5 is the
default setting.
. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the
display.
Key Tone
From the Sound Setup Menu:
1. Press the
caller ID-volume (5 or 6) button to scroll to the KEY TONE sub-menu.
. Press mute/menu OK button to enter the menu. The screen displays > ON OFF.
. Use caller ID-volume (5 or 6) button to scroll to your selection. ON is the default
setting.
. Press the mute/menu OK button to confirm and the key tone setting shows in the
display.
Reset Setting
1. Make sure your phone is OFF (not in TALK mode).
. Press the mute/menu OK button to go to the main menu.
. Press caller ID-volume (5 or 6) button to scroll to RESET SETTINGS.
. Press mute/menu OK button to confirm and you may program the following
items: Voicemail, All Settings.