GE 28213 Series - Manual (Page 24)


Answering Calls
1. When the phone rings, pick up the handset and press the TALK/SPEAKER button.
. When finished, press END button to hang up.
- OR -
If the auto talk mode is selected, pick up the handset from the charge cradle to
answer the call immediately.
NOTE: Adjust the handset volume by pressing the caller ID-volume
(5 or 6) button during a call.
Call Timer
After you press the TALK/SPEAKER button on the handset, the built-in call timer shows
on the display and counts the length of time of the call in minutes and seconds.
Auto Standby
If you place the handset in the cradle while the handset is off the hook (during a call),
the call is automatically disconnected.
Ringer Volume (Shortcut)
There are two ways to set the ringer volume. One is the traditional way as described in
the Programming Functions; Sound Setup; Ringer Volume menus. The other one is this
short cut to ringer menu.
1. Make sure the phone is
OFF (not in TALK mode).
. Press the #pause/ringer button to display SET RINGER LEVEL 5.
. Use the caller ID-volume (5 or 6) button to scroll to your selection. LEVEL 5 is
the default setting.
. Press #pause/ringer button again to save and display the new selection for a few
seconds.