GE 25880 - Manual (Page 16)

16
2. Use the caller ID (rev or skip) button to select the current day.
3. Press program/flash until SET TIME shows on the display. “12:00 AM” is
the default setting.
4. Use the touch-tone pad to enter the first digit of the hour, then enter the
second digit of the hour, the first digit of the minute, and the second
digit of the minute.
5. Use the caller ID (rev or skip) button to scroll to AM or PM.
6. Press program/flash again to store your selection.
L
OCAL
A
REA
C
ODE
NOTE: This setting may be made with the base or the cordless handset.
1. Press the program/flash button until SET AREA CODE - - - or AREA
CODE - - - shows in the display. “- - -” is the default setting.
2. Use the cordless handset or base number pad to enter your three digit
area code.
3. Press program/flash again to store your selection.
NOTE: To restore the default setting to “- - -”, press and release delete button on
base or del/chan button on handset when “SET AREA CODE” or “AREA CODE”
shows in the display.
R
EGISTRATION
(L
INK
C
ORDLESS
H
ANDSET
)
Registration links the base to a cordless handset. Once a handset is
registered it can use the base’s phone connection. A cordless handset will
not operate until it is registered to the base. During the registration
process, keep the handset near the base.
1. Press the program/flash button on the base until LINK HANDSET ?
shows in the display. “ 2NO” is the default setting.
2. Press the 1 number key or press the caller ID (rev or skip) button on the
base to scroll to 1YES.
3. Press program/flash on the base to confirm handset is linked to the
base. WAITING HANDSET REGISTRATION shows in the display.