GE 25880 - Manual (Page 24)

24
S
WITCHING
B
ETWEEN
S
PEAKERPHONE AND
H
ANDSET
You can switch between speakerphone and handset after dialing a number,
or any time during a conversation.
Speaker to Cordless/Corded Handset — Press talk/end/call back on handset,
and then press speaker/call back on the base. Or lift the corded handset when
using speaker phone. Speak into the cordless/corded handset.
Corded/Cordless Handset to Speaker — Press speaker/call back, then
hang up the handset. Speak into the Speakerphone.
I
NTERCOM
O
PERATION
A two-way intercom is possible between the base and cordless handset
without tying up the telephone line and since the telephone line is not
used, you can still receive incoming calls.
NOTE: There is no conference and intercom features between handsets.
M
AKING AN
I
NTERCOM
C
ALL
1. Make sure the phone is OFF (not in TALK mode).
2. Press the page/intercom button (on base) or int/transfer button (on
handset). A paging tone sounds at the base and cordless handset.
3. When finished, press the page/intercom button on base or int/transfer
button on cordless handset.
NOTE: To cancel the intercom call, press page/intercom on base or int/
transfer button on cordless handset.
A
NSWERING AN
I
NTERCOM
C
ALL
1. Press the talk/end/call back button or int/transfer button on cordless
handset, or speaker/call back button or page/intercom on base.
2. When finished, press the page/intercom button or speaker/call back
button on base or talk/end/call back button or int/transfer button on
cordless handset.