Go-Video DP7040 - Manual (Page 10)

10
Basic TV Connections
You can connect the portable DVD player to a
standard television using the player’s Audio and
Video jacks.
1 Connect the supplied audio cable (mini-plug to
RCA stereo) from the Audio jack on the side of the
player to the Audio Inputs on your television.
2 Connect the supplied video cable (mini-plug to
RCA video) from the Video jack on the side of the
player to the Video Input on your television.
3 Slide the AV Out/AV In switch to the AV Out
position.
4 Set your TV to its appropriate Video input to view
the player.
Connections
Enhanced Video Connections
For improved picture quality, you can connect the
portable DVD player to a TV equipped with S-Video or
Progressive Scan inputs. These connections require
special cables with mini-plug adapters (not included).
S-Video Connections
1 Connect an S-Video cable with mini-plug adapter
(not included) from the S-Video jack on the side of
the player to the S-Video input on your television.
2 Slide the AV Out/AV In switch to the AV Out
position.
3 Set the Video Output to S-Video in the player’s
Screen/TV Tuner menu (see page 23).
• You can also press the
Mode button as a
shortcut to switch between S-Video and
Progressive Scan modes.
4 Set your TV to its S-Video input to view the player.
Progressive Scan/Component Video
Connections
1 Connect a Component Video cable with mini-
plug adapter (not included) from the P-Scan
jack on the side of the player to the Progressive
Scan/Component Video inputs (Y, Pb, Pr) on your
television.
2 Slide the AV Out/AV In switch to the AV Out
position.
3 Set the Video Output to P-Scan in the player’s
Screen/TV Tuner menu (see page 23).
• You can also press the
Mode button as a shortcut
to switch between S-Video and Progressive Scan
modes.
4 Set your TV to its Progressive Scan input to view the
player.
AUDIO IN VIDEO IN
Y Pb Pr
��
S-VIDEO IN