Go-Video DP7040 - Manual (Page 16)

16
Playing Audio CDs
Before You Begin...
Connect the portable DVD player to a power outlet
and plug in headphones or listen to the built-in
speakers. You can also connect the player to external
equipment, such as a TV and/or audio system. If you
do this, remember to:
• Turn on your TV and select the appropriate video
input.
• Turn on your stereo or audio system and select
the appropriate audio input.
• Slide the AV Out/AV In switch to the AV Out
position.
Basic Audio CD Playback
1 Press Power on. Power Power
2 Press Open to open the disc cover.
3 Hold the edge of the disc and place it in the tray
with the label side up.
• Press the disk onto the spindle in the center of
the tray.
4 Close the disc cover.
• Standard CDs start playing automatically.
• If the CD has playback control, the CD disc
menu will appear.
Stopping Playback
• Press  Stop once to stop and hold playback at
the current position.
• Press  Stop twice to stop and reset the disc to
the beginning.
Other Disc Playback Other Disc Playback
Forward/Reverse Scan
Press  or  during playback.
• Normal playback is resumed when you press
/Select.
• The Forward Scan (  x2,  x4, etc.) and
Reverse Scan (  x2,  x4, etc.) speed changes
each time you press the  /  buttons.
Skipping Ahead
Press  during playback.
• Skips a track each time you press the  button.
Skipping Back
• Press  during playback.
• When you press the  button midway through
a track, the portable DVD player returns to the
beginning of the track. The player then skips a
track each time you press the  button.
Pause
Press  Pause once during playback.
• Playback is paused.
To return to normal playback
Press /Select.
Displaying Track Information
Press Info. during playback.
• Press Info. repeatedly to display the elapsed
time, track number, and other information on the
screen.
Stop Displaying Track Information
• Press Info. repeatedly until the track information
disappears.