Go-Video DP7040 - Manual (Page 24)

24
Audio Setup
: Move : Select SETUP: Quit
Digital Out SPDIF/PCM
SPDIF/RA
R R W A A
Off Of Of
WARNING:
• Do not set “Digital Out” to “SPDIF/RAW”
unless you are connecting the player to an
A/V amplifi er/receiver with Dolby Digital (AC-3)
decoding capability.
• High volume sound may damage your hearing
as well as the speakers.
To return to the Setup menu
Press  .
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
Digital Audio Output [DVD]
The digital audio output jack (labeled “Coaxial”) is
used to output the audio signal recorded on DVD
discs to an external amplifi er/receiver. The player
provides three options for this audio signal:
• SPDIF/PCM - Select if you are using a 2-channel
digital amplifi er.
• SPDIF/RAW - Select if you are using a Dolby
Digital 5.1 or DTS capable amplifi er.
• Off - Select if you are not using the Coaxial audio
output.
1 Press Setup in Stop mode.
2 Press  /  to select “Audio Setup”, then press
/Select.
3 Press  /  to select “Digital Out”, then press
/Select.
4 Press  /  to select your preferred Digital Out
setting.
5 Press /Select.
Audio Setup