Go-Video DP7040 - Manual (Page 28)

28
Using the Optional DPT100 Tuner Using the Optional DPT100 Tuner
About the DPT100
The DPT100 is an optional 181-channel tuner that
converts your DVD player into a portable television.
The tuner connects to the side of the DVD player
and is powered by the player, so no additional power
source is required. Use the supplied antenna to
receive local TV broadcasts while you’re on the go. Or
for improved reception, use the RF adapter to connect
to your home’s cable TV source or a rooftop antenna.
Connecting the Tuner
Connect the TV tuner to the DVD player as follows:
1 Align the tuner with the edge of the DVD player
and insert the tuner’s connector into the DVD
player’s TV Tuner Input jack.
• The tuner support pin must be inserted at
the same time as the jack to make a secure
connection.
Using the Antenna
Connect the antenna to the TV tuner as follows:
1 Connect the TV tuner to the player as described
above.
2 Connect the antenna to
the EXT. ANT port on the
tuner. Align the square
base of the antenna
jack with the sides of the
input.
3 You are now ready to
search for channels.
1
2
3
Video Output connector:
Connects to the DVD player
Antenna
Input Jack
Connects to
the antenna or
RF adapter
Tuner Support Pin:
Connects to the DVD player
1
2
3 RF Adapter
Using the RF Adapter
Connect the RF adapter to the TV tuner as follows:
1 Connect the TV tuner to the player as described
above.
2 Connect the RF adapter to the EXT. ANT port on
the tuner.
3 Connect the RF cable from your cable TV wall
outlet, cable box, antenna, or other RF source to
the RF adapter.
4 You are now ready to search for channels.