Gaggia TITANIUM Espresso Machine - Manual (Page 18)

ENGLISH
• 36 •
• After accessing the programming mode press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select
the function:
TEMPERATURE
then enable it by pressing “MENU/OK”.
The display will show, for example:
TEMPERATURE
MEDIUM
• Press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select the desired temperature and memorise
it by pressing “MENU/OK”.
PRE-BREWING
In the pre-brewing process the coffee is slightly moistened before actual
brewing. This brings out the full aroma of the coffee, which thus acquires
a delicious flavour.
• Press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select the function:
PREBREWING
then enable it by pressing “MENU/OK”.
The display will show:
PREBREWING
ON
• by pressing “ ∧∧∧∧∧” or “∨∨∨∨∨” you can choose to deactivate the function
PREBREWING
OFF
or extend the pre-brewing phase
PREBREWING
LONG
to enhance the flavour of your coffee.
• Memorise the choice by pressing “MENU/OK”.
PRE-GRINDING
With the pre-grinding process the appliance grinds twice: the first
time for the type of coffee selected and the second time for the
next coffee (not yet selected).
This function is useful only if you have to make
several coffees at the same time (e.g. when
entertaining guests or during a party).
• After accessing the programming mode, press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select
the function:
PREGRINDING
enable it by pressing “MENU/OK”.
• The display will show:
PREGRINDING
OFF
Press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select the desired setting and memorise it by
pressing “MENU/OK”.
TOTAL COFFEES
This function allows you to display how many coffees the appliance has
made to date.
• After accessing the programming mode, press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select
the function:
TOTAL COFFEES
enable it by pressing “MENU/OK”. The display will show, for
example:
TOTAL COFFEES
86
TIMER
This coffee maker features a new function that allows you to save energy
in case of long periods of quiescence. This function, which is factory set,
automatically switches the machine from the
SELECT PRODUCT
READY FOR USE
status to the
ENERGY SAVING
mode after 3 hours have elapsed since the previous use.
• The switch-off time can be set at 15-minute intervals, down to a
minimum of 15 minutes. The function may not be disabled.
• In the programming mode press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select the
TIMER
courtesy of