Gaggia TITANIUM Espresso Machine User Manual

Page 19

Advertising
background image

ENGLISH

• 37 •

function and activate it by pressing “MENU/OK”.

The display will show:

STANDBY
AFTER: 3:00

• Press “

∧∧∧∧∧” or “∨∨∨∨∨”to select the desired setting and press

“MENU/OK” to store it.

Note: if ON/OFF times have been activated through
the “CLOCK” function, this function will be ignored.

CLOCK

This function may be activated and deactivated by the user. It is used to:
-

display the current time when the machine is in the “ENERGY
SAVING” or “FUNCTION SELECTION” mode;

-

program the machine to switch on and off at a specific time.

In order for the programming function to work properly, you must set
the clock to the current time.

• Press “

∧∧∧∧∧” or “∨∨∨∨∨” to select the function:

CLOCK

enable it by pressing “MENU/OK”.

• Press “

∧∧∧∧∧” or “∨∨∨∨∨” to select the function:

CLOCK TIME

enable it by pressing “MENU/OK”.

• Press “

∧∧∧∧∧” or “∨∨∨∨∨” to set the current hour and memorise it by pressing

“MENU/OK”;

CLOCK TIME

1:18

Then press “

∧∧∧∧∧” or “∨∨∨∨∨” to set the minutes and memorise the setting

by pressing “MENU/OK”.

The clock is set and the machine will go back to the previous menu.

Note: keeping the buttons pressed down will allow you
to go through the numbers quickly.

Note: the clock setting is also maintained when the
machine is off

Displaying the time

• press “

∧∧∧∧∧” or “∨∨∨∨∨” to select the function

SHOW CLOCK TIME

and enable it by pressing “MENU/OK”.

• press “

∧∧∧∧∧” or “∨∨∨∨∨” to activate or deactivate the function

SHOW CLOCK TIME
ON

and memorise the setting by pressing “MENU/OK”.

Note: the time may be displayed only at certain times;
this function must be deactivated by the user

• If you want to deactivate the function press “

∧∧∧∧∧” or “∨∨∨∨∨” to choose:

SHOW CLOCK TIME
OFF

and memorise by pressing “MENU/OK”

Programming the machine to switch on and off .

The machine can be switched on and off automatically without the
user’s intervention. You can program only one time for the machine to
go on and one time for it to go off.

Note: this function is enabled only if the on/off switch
(7) is positioned on “I” (on).

• press “

∧∧∧∧∧” or “∨∨∨∨∨” to select the function:

ON/OFF TIME

and enable it by pressing “MENU/OK”.

• Select the hour when you want the machine to go on by pressing

∧∧∧∧∧” or “∨∨∨∨∨” and memorise by pressing “MENU/OK”.

ON/OFF TIME
ON

7:30

then press “

∧∧∧∧∧” or “∨∨∨∨∨” to set the minutes and memorise the setting

by pressing “MENU/OK”.

• Select the hour when you want the machine to go off by pressing

∧∧∧∧∧” or “∨∨∨∨∨” and memorise by pressing “MENU/OK”;

Advertising