Gaggia TITANIUM Espresso Machine - Manual (Page 20)

ENGLISH
• 38 •
ON/OFF TIME
OFF
9:30
then press “ ∧∧∧∧∧” or “∨∨∨∨∨” to set the minutes and memorise the setting
by pressing “MENU/OK”.
Warning: if the on/off time settings coincide, the
machine will ignore both. After the times have been
set, the clock must be activated in order for the function to work.
Activating the automatic on/off function
Note: activating this function makes sense only if you
have already set the on/off times.
• Press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select the function:
CLOCK
enable it by pressing “MENU/OK”.
• The display will show:
CLOCK
OFF
In this case pressing “MENU/OK” will deactivate the function.
Choose to activate the function by pressing “
∧∧∧∧∧” or “∨∨∨∨∨” and when
CLOCK
ON
appears, memorise the setting by pressing “MENU/OK”.
When you exit the programming mode, the machine will check the set
parameters. If the current time falls within the set deactivation time,
the display will indicate:
ENERGY SAVING
Note: during the set deactivation period, the machine
can be restarted at any time by pressing “MENU/OK”.
Later, to deactivate the machine again, go into the
programming mode by pressing “MENU/OK” and exit
immediately by pressing “ESC”.
RINSING CYCLE
With this function, all the parts involved in the coffee dispensing
process undergo a washing cycle with water.
During the wash cycle it is recommended that a person
be on hand to supervise the operation.
• To start the wash cycle, press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select the function:
RINSING CYCLE
to enable the function press “MENU/OK”. Press “MENU/OK”
again to start the wash cycle.
• When the wash cycle is completed, the following message will
appear.
FILL WATERTANK
At this point fill the water tank. The machine will automatically
switch to the normal operating mode and the following message
will appear on the display:
SELECT PRODUCT
READY FOR USE
FACTORY SETTINGS
This function allows you to restore all the machine operating parameters
originally set by the manufacturer.
• After accessing the programming mode, press “ ∧∧∧∧∧” or “∨∨∨∨∨” to select
the function:
FACTORY SETTINGS
then enable it by pressing “MENU/OK”. The following indication
will appear:
FACTORY SETTINGS
NO
• Choose whether you want to restore the factory settings by pressing
“ ∧∧∧∧∧” or “∨∨∨∨∨” and press “MENU/OK” to confirm your selection.
Caution: when you restore all the factory settings, you
will lose any custom settings you have made on the
machine.
14 LEGAL INFORMATION
• This instruction book contains the information you need in order to
use and upkeep your appliance correctly.
• The information should be viewed as a guideline for using and
upkeeping your coffee maker in safety. The information is not
exhaustive. For additional information or for information on topics
not covered or inadequately covered in this instruction book, please
contact an authorized service centre or the manufacturer directly.