GarrettCom Magnum MNS-6K - Manual (Page 123)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
122
Syntax configure vlan type=port enter the VLAN configuration commands
Syntax vlan type=port enter the VLAN configuration commands
Syntax add id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[forbid=<number|list|range>] [<mgt|nomgt>] - adding VLAN
Syntax edit id=<vlan id> [name=<vlan name>] port=<number|list|range>
[<mgt|nomgt>] - edit existing VLAN name
Syntax start vlan=<name|number|list|range> activate the VLAN configuration
Syntax save save the configuration (including the VLAN configuration)
Syntax show vlan type=<port|tag> [<id=vlanid>] display specific VLAN information
Syntax set-port port=<number|list|range> default id=<number> sets the default VLAN id.
For Magnum 6K family of switches, the default VLAN id is 1, unless changed using this command
Syntax set-port port=<number|list|range> filter status=<enable|disable> enables or disables
the VLAN filtering function.
Syntax set-port port=<number|list|range> tagging id=<number> status=<tagged|
untagged> defines whether the outgoing packets from a port will be tagged or untagged.
Syntax set-port port=<number|list|range> join id=<number> adds the specified port(s) to the
specified VLAN id
Syntax set-port port=<number|list|range> leave id=<number> releases a specific port from a
VLAN
Syntax show-port [port=<port|list|range>] shows all parameters related to tag vlan for the list of ports.
If the port parameter is omitted, it will display all ports