GarrettCom Magnum MNS-6K - Manual (Page 246)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Note – this is needed if you plan to cut and paste between a serial window and another file. This
allows the buffer management of the serial port on the Magnum 6K family of switches.
Miscellaneous commands
Some of the commands listed below may be useful in repeating several commands over and over
again. They are
Syntax !! – repeat the last command
Syntax !<n> - repeat the “n”th command (as indicated by a show history)
Syntax show history – show the last 25 commands executed – if less than 25 commands are executed, only
those commands executed are shown
If the user logs out or if the switch times out – the history is erased. The history
count restarts when the user logs in again
Syntax <Up-arrow> - every time the key is pressed, the last command is printed on the screen but not executed.
This allows for editing errors made in typing
Syntax <Down-arrow> - opposite of Up-arrow key
Syntax show version – displays the version of MNS-6K being used
Magnum6K25#
show version
MNS-6K Ver: 3.6 Date:Oct 20 2006 Time:17:22:35 Build ID 1161390154
Magnum6K25#
show setup
Version
: Magnum 6K25 build 3.6 Oct 20 2006 17:22:35
MAC Address : 00:20:06:25:ed:80
IP Address : 67.109.247.197
Subnet Mask : 255.255.255.224
Gateway Address : 67.109.247.193
CLI Mode : Manager
System Name : pierpaolo
System Description : 25 Port Modular Ethernet Switch
System Contact : [email protected]
System Location : HQ, Fremont, CA
System ObjectId : 1.3.6.1.4.1.553.12.6
Magnum6K25#
show serial
245