GarrettCom Magnum MNS-6K - Manual (Page 75)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax remove ip=<ipaddress> mask=<netmask> - remove specific IP address(s) or
subnet
Syntax removeall - remove all managers
Syntax show ip-access – display list of authorized managers
access – context are the access commands
allow – allow specified services for specified IP addresses – IP addresses can be individual
stations, a group of stations or subnets. The range is determined by the IP address and
netmask settings
deny – deny specified services for specified IP addresses – IP addresses can be individual
stations, a group of stations or subnets. The range is determined by the IP address and
netmask settings
remove – eliminate specified entry from the authorized manager list
removeall – remove all authorized managers
service – the services allowed or denied are telnet, web and SNMP
It is assumed here that the user is familiar with IP addressing schemes
(e.g. Class A, B, C etc.), subnet masking and masking issues such as
how many stations are allowed for a given subnet mask.
In the examples – any computer on 192.168.5.0 network is allowed (note how the subnet
mask is used to indicate that). Also a specific station with IP address 192.168.15.25 is
allowed (again note how the subnet mask is used to allow only one specific station in the
network.) Older station with IP address 192.168.15.15 is removed.
Magnum6K25#
access
Magnum6K25(access)##
allow ip=192.168.5.0 mask=255.255.255.0 service=telnet
Service(s) allowed for specified address
Magnum6K25(access)##
allow ip=192.168.15.25 mask=255.255.255.255 service=telnet
Service(s) allowed for specified address
Magnum6K25(access)##
remove ip=192.168.15.15 mask=255.255.255.255
Access entry removed
Magnum6K25(access)##
exit
74