GarrettCom Magnum MNS-6K User Manual

Page 281

Advertising

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E

Command

Description

clear command to clear various aspects of the
MNS-6K information – most notably “clear
addr” – clears the addresses learnt or “clear log”
to clear the logs (and the type of logs)

clear logs or specific type of logs

climode <script|console|show>

set the interactive CLI mode on (console) or off
(script). To see the mode – use the show option

com2sec <add|delete> id=<id>
[secname=<name>] [source=<source>]
[community=<community>]

a part of the View based Access control model
(VACM) as defined in RFC 2275. This
specifies the mapping from a source/community
pair to a security name. On MNS-6K, up to 10
entries can be specified

command

<Enter>

options for a command

community [write=<write community>]
[read=<read community>] [trap=<trap
community>]

set the necessary community strings

configure access

sets the access parameters e.g. disable telnet
session

cost port=<number|list|range>
value=<0-65535>

cost is specific to a port and the port(s) have to
be specified

configure port-security

sets the port authorization based on MAC
addresses

configure vlan type=port

enter the VLAN configuration commands

cost port=<number|list|range>
value=<0-65535>

cost is specific to a port and the port(s) have to
be specified

deftrap community=<string>

defines the default community string to be used
when sending traps. When user does not specify
the trap community name when setting a trap
station using the “trap” command, the default
trap community name is used

280

Advertising