Installation instructions, Tools and parts, Options – Maytag W10099070 User Manual

Page 4

Advertising
background image

4

INSTALLATION INSTRUCTIONS

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.

Parts supplied

Remove parts packages from dryer drum. Check that all parts are
included.

4 Leveling legs

NOTE: Do not use leveling legs if installing the dryer on a
pedestal.

Parts needed

Check local codes. Check existing electrical supply and venting.
See “Electrical Requirements” and “Venting Requirements”
before purchasing parts.

For close-clearance installations between 31.5" (80.01 cm)
and 37" (93.98 cm), see “Plan Vent System” section for
venting requirements.

Mobile home installations require metal exhaust system hardware
available for purchase from the dealer from whom you purchased
your dryer. For further information, please refer to the “Assistance
or Service” section of this manual.

Options

Pedestal

Are you placing the dryer on a pedestal? You have the option of
purchasing a pedestal separately for this dryer. You may select a
15.5" (39.4 cm) pedestal. This pedestal will add to the total height
of the dryer for a total height of approximately 53.5" (135.9 cm).

For a garage installation, you will need to place the pedestal at
least 3.5" (8.9 cm) above the floor.

Optional pedestal

To order, call the dealer from whom you purchased your dryer or
refer to the “Assistance or Service” section of this manual.

Stack Kit

Are you planning to stack your washer and dryer? To do so, you
will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or
refer to the “Assistance or Service” section of this manual. Ask
for Part Number 8541503.

Flat-blade screwdriver

#2 Phillips screwdriver

Adjustable wrench that
opens to 1" (2.5 cm) or
hex-head socket wrench
(for adjusting dryer feet)

Wire stripper (direct wire
installations)

Level

Vent clamps

Caulking gun and
compound (for installing
new exhaust vent)

Tin snips (new vent
installations)

¼" nut driver
(recommended)

Tape measure

37"
(93.98 cm)

Pedestal

Height

Color

Part Number

15.5" (39.4 cm)

White

WHP1500SQ

15.5" (39.4 cm)

Black

WHP1500SB

Advertising