Motorola APS120 - Manual (Page 64)

B • 2
• The Security Code Passwor d controls user access to the APS Custom
programming. Users are prompted to enter the security code password when
they press the ‘#’ (pound) key and select “1” for programming in response
to the APS Custom Main Greeting. The default password value is 9832. The
system re q u i res that the password consist of four digits numbering 0 through 9.
The password may be changed by the APS Custom administrator using the PCI
at any time. Entering the proper sequence of DTMF keys allows the user to enter
P rogramming Mode on the APS Custom. Users may record or delete names or
announcements in this mode. Modifying announcements requires a second
level of password access.
NOTE: The Security Code should NOT be given out so that each individual
can record their own name. The APS Custom System was designed to
have a single person re c o rding all the user names for the system. This way
all re c o rd i n g s sound consistent.
Each APS Custom user has one additional password that allows them to change their
current paging method to any of their available paging methods. Also a four-digit
DTMF password consisting of digits numbered 0 through 9, this password is modified
via the APS Custom PCI User Records screen (Figure 3-11). Users are prompted to enter
this password when they select the
* (star) key in response to the APS Custom Main
Greeting. Users can select Overhead, Local, Wide Area or None. This password is set
by each individual user and entered in to the user database on the APS Custom PCI. It
is recommended that the password be unique for each configured user.