Meridian America DSP33 - Manual (Page 22)

Setting up the DSP33 Digital Loudspeaker System
17
To connect two DSP33 loudspeakers
to a Meridian CD Player or other
digital source
DIGITAL
OUTPUT COMMS
COMMS
OUTPUT INPUT
DIGITAL
INPUT OUTPUT
2
1
S5 lead
DSP33 – Main R DSP33 – Main L
M5 lead
COMMS
OUTPUT INPUT
DIGITAL
INPUT OUTPUT
2
1
CHANNEL CHANNEL
512 Remote Eye
D5 lead
508.24 24-Bit CD Player
You can create a complete system by connecting a pair of DSP33
loudspeakers directly to a digital source. You need the optional
Meridian 512 Remote Eye, and a D5 lead, to allow you to control
the volume and balance using the Meridian System Remote.
● Connect one of the COMMS sockets on the Meridian source,
and the digital output, to one of the digital speakers and one
of the sockets on the D5 lead, as shown in the diagram.
● Connect the 512 Remote Eye to the other socket on the D5
lead.
● Link the two digital speakers together using the S5 lead
supplied, as shown in the illustration.
● Set the CHANNEL switch to the appropriate position on each
loudspeaker.
See the chapter Using the DSP33 Digital Loudspeaker system,
page 19, for information about controlling the DSP33
loudspeakers.