Meridian America DSP33 - Manual (Page 36)

Configuring the DSP33 loudspeakers using a computer
31
To configure the source options
● Select the source in the list of sources.
The settings for the source are shown in a panel to the right:
To change the name used to identify the source when using
RS232 control:
● Choose a name from the Name drop-down menu.
This section describes how to use the Meridian Configuration
program to configure the sources provided by the digital active
loudspeaker.
To set up sources
● Click the Sources icon in the left-hand panel of the Meridian
window.
The right-hand panel shows a list of the 12 sources that are
available. For each source you can configure its audio, tone, and
advanced settings.
Setting up sources