Meridian America DSP33 - Manual (Page 35)

30
Configuring the DSP33 loudspeakers using a computer
For best results with a Meridian D1500 or D2500 subwoofer
choose Free, Boundary, or Corner as appropriate.
If you have specified the Speaker Use as Centre you can apply
a Centre Speaker tilt offset, which is added to the Tilt value for
the selected source.
The recommended setting is -1dB when the speaker is
positioned above a television.
Start volume
The Start volume setting determines the volume selected on
coming out of standby.
● Set the Start volume to 65 to leave the volume unchanged
(as on other Meridian products).
● Set the Start volume to a value other than 65 to set the
volume to that value.
Advanced options
The Advanced options are described in the following table:
Option What it means
Volume control Specifies whether the DSP33
provides volume control for the
system. Choose Main if the DSP33 is
in the main room, Secondary if the
DSP33 is used in a second room, or
None if the DSP33 is in the second or
third room of a three-room system.
Comms controller Specifies whether the DSP33 is
status controller, not controller, or set
automatically.
System address For multi-room setups.