Multiquip MQ Power Duelweld Welder/Ac Generator BLW-400SSW User Manual
Page 25
BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV. #1 (06/15/01) — PAGE 25
BLW-400SSW — OUTPUT TERMINAL OVERVIEW
Output Terminal Panel Available Voltages
The BLW-400SSW is a single phase generator only. It is
able to supply both 120 volt and 240 volt.
Maximum Amps
The BLW-400SSW can provide 41.7 amps at 120 or 240
volts. Do not exceed the maximum amps!
When using plural single phase
voltages, make sure to balance
the load on each of the single
phase legs.
NOTE
120V Hard Wire Hookup
The output terminal panel, when suppling single phase 120
volts, will provide two circuits available at 41.7 amps with
any two wires plus the ground. (See Figure 10 below.)
240V Hard Wire Hookup
The output terminal panel, when suppling single phase 240
volts, will provide one circuit available at 41.7 amps with
two wires plus the ground. (See Figure 11 below.)
Figure 10. Hard Wire Hookup for
120 Volt
Figure 11. Hard Wire Hookup for
240 Volt
Table of Contents